TEC Electric 0.18kW 3ph 4 Pole Foot and Face Mounting (B34) 63 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed Mains Supply Output: 0.18kW (0.25HP) x 1350RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 135RPM to 2700RPM for 5Hz to 100Hz, with suitable de-rating at the lower speeds (70Hz is the maximum continuous for maximum output, as advised by the Manufacturer).
Full Load Current - 1.22A at 230V, or 0.7A at 400V.
Power Factor is 0.65 when mains connected at 50Hz.
Efficiency is 60% at full load. A more efficient motor is available, please see linked products below
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
130mm Wide x 215mm Long x 173mm high overall in its IP55 enclosure.
Face mount on 4 x M5 holes equispaced on 75mm PCD with 60mm diameter spigot in the 90mm diameter flange.
Foot mount on 7mm holes at 100mm wide x 80mm centres 40mm back from shaft shoulder.
Shaft is 11mm dia x 23mm with 4mm wide key.
Weight is 4.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistors included for over-temperature protection.
Manufacturer Part Number is 0.1843TECAB34 63. Previous Part Number was- 63M4B-TECA (63 M4B TEC-A)
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.63Nm - 0.18kW (0.25HP) x 2700RPM at 100Hz
1.27Nm - 0.18kW (0.25HP) x 1350RPM at 50Hz
1.27Nm - 0.09kW (0.12HP) x 675RPM at 25Hz
1.27Nm - 0.018kW (0.025HP) x 135RPM at 5Hz
Continuous Output when Inverter powered is...
0.9Nm - 0.18kW (0.25HP) x 1890RPM at 70Hz
1.27Nm - 0.18kW (0.25HP) x 1350RPM at 50Hz
1.08Nm - 0.077kW (0.1HP) x 675RPM at 25Hz
0.63Nm - 0.009kW (0.012HP) x 135RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-