TEC Electric 0.18kW 3ph 4 Pole Flange Mounting (B14) 63 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed Mains Supply Output: 0.18kW (0.25HP) x 1350RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 135RPM to 1890RPM for 5Hz to 70Hz, with suitable de-rating at the lower speeds (70Hz is the maximum continuous for maximum output, as advised by the Manufacturer).
Full Load Current: 1.22A at 230V, or 0.7A at 400V.
Power Factor: 0.65 when mains connected at 50Hz.
Efficiency: 60% at full load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Dimensions: 130mm Wide x 215mm Long x 173mm high overall.
Enclosure Rating: IP55 enclosure.
Face mount on 4 x M5 holes equispaced on 75mm PCD with 60mm diameter spigot in the 90mm diameter flange.
Shaft: 11mm dia x 23mm with 4mm wide key.
Weight: 4.5kg.
Ambient: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for external over-temperature protection device.
Part part number: 63M4B-TECA (63 M4B TEC-A).
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.63Nm - 0.18kW (0.25HP) x 2700RPM at 100Hz
1.27Nm - 0.18kW (0.25HP) x 1350RPM at 50Hz
1.27Nm - 0.09kW (0.12HP) x 675RPM at 25Hz
1.27Nm - 0.018kW (0.025HP) x 135RPM at 5Hz
Continuous Output when Inverter powered is...
0.9Nm - 0.18kW (0.25HP) x 1890RPM at 70Hz
1.27Nm - 0.18kW (0.25HP) x 1350RPM at 50Hz
1.08Nm - 0.077kW (0.1HP) x 675RPM at 25Hz
0.63Nm - 0.009kW (0.012HP) x 135RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-