TEC Electric - 0.18kW 3ph 4 Pole Foot and Flange Mounting (B35) 63 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed Mains Supply Output: 0.18kW (0.25HP) x 1350RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 135RPM to 2700RPM for 5Hz to 100Hz, with suitable de-rating at the lower speeds (70Hz is the maximum continuous for maximum output, as advised by the Manufacturer).
Full Load Current - 1.22A at 230V, or 0.7A at 400V.
Power Factor is 0.65 when mains connected at 50Hz.
Efficiency is 60% at full load. A more efficient motor is available, please see linked products below
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
130mm Wide x 215mm Long x 173mm high overall in its IP55 enclosure
Flange mount on 4 x 10mm holes equispaced on 115mm PCD with 95mm diameter spigot in the 140mm diameter flange.
Foot mount on 7mm holes at 100mm wide x 80mm centres 40mm back from shaft shoulder.
Shaft is 11mm dia x 23mm with 4mm wide key.
Weight is 4.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor overtemperature protection.
Manufacturer Part Number is 0.1843TECAB35 63. Previous Part Number was - 63M4B-TECA (63 M4B TEC-A)
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.63Nm - 0.18kW (0.25HP) x 2700RPM at 100Hz
1.27Nm - 0.18kW (0.25HP) x 1350RPM at 50Hz
1.27Nm - 0.09kW (0.12HP) x 675RPM at 25Hz
1.27Nm - 0.018kW (0.025HP) x 135RPM at 5Hz
Continuous Output when Inverter powered is...
0.9Nm - 0.18kW (0.25HP) x 1890RPM at 70Hz
1.27Nm - 0.18kW (0.25HP) x 1350RPM at 50Hz
1.08Nm - 0.077kW (0.1HP) x 675RPM at 25Hz
0.63Nm - 0.009kW (0.012HP) x 135RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-