Your Cart is empty!
Brand: TEC Electric Motors, Range: TECA Three Phase Aluminium
TEC 132M Frame - 11kW 3ph 4 Pole Foot and Flange Mounting AC Motor for 400V or 690V 3 phase supply. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Can be used over a 10:1 Speed Control range from 290RPM to 2920RPM, with suitable de-rating at the lower speeds.
Fixed mains supply output is 11kW (15HP) x 1460RPM at 400V x 50Hz 3ph.
Full Load Current - 20.8A at 400V. Power Factor is 0.85 when mains connected at 50Hz. Efficiency is 89.8% at full load.
300mm Wide x 498mm Long x 318mm high overall in its IP55 enclosure. Foot Mount via via 4 x 12mm holes on 216mm x 178mm centres, 89mm back from the shaft shoulder. Flange mount on 4 x 15mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange. Shaft is 38mm diameter x 80mm long with a 10mm wide keyway. Weight is 67kg.
Rated at 40C Ambient. Ventilation space required at rear cooling air intake.
Full part number is - 11.043TECAB35-132-IE2 (T2A 132M3-4 or 132M4C-TECA)
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.
10075636
(RPW-PTC-E05)
Order code: 28279
50+ in stock
G-132B2
Order code: 31787
1 in stock
2+ normally 3-5 days
ACS355-03E-23A1-4
(3AUA0000058192)
Order code: 19140
2+ normally 14 weeks
We've sent you a message containing a confirmation link. Click the link to complete the process.