Vacon NXL IP54 AC Frequency Inverter for 15kW (20HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 31A at high overload, or 18.5kW (25HP) to 38A when Fan/Pump rated. Simple to set up for a standard AC Induction motor.
Frame 6 - 195mm Wide x 237mm Deep x 519mm High, IP54 / NEMA 12.
Overload - 200% Output Current x 2 seconds and 150% x 60 seconds at High Overload, 110% Output Current x 60 seconds when Fan/Pump rated.
Speed Control Range - 0-320 Hz (standard)
Braking - To 21 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Features - 2 Analogue Inputs, 3 x Digital Inputs (plus the I/O Expander), 1 x Analogue Output, 1 Relay Contact set and RS485 Communications.
Parameter setting via keypad
Input Current - as output current.
Input Voltage - 380-500V -15%/+10% at 50-60Hz (± 10%)
EMC Filters to EN61800-3 category C2 1st and 2nd environments (Domestic and Industrial)
Wall mount using 4 x 9mm holes at rear.
Rated at 40°C Ambient.
Ventilation space required above: 160mm
Ventilation space required below: 80mm
Ventilation space at sides: 20mm
Full part number is - NXL00385C5H1SSS00AA
Download the Vacon NXS/NXP Manual from the link below:-