Parker AC10 series AC Frequency Inverter for 37kW (50HP) 400V three phase motor in VxF or Sensorless Vector control to 75A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Size 7: 315mm Wide x 234mm Deep x 480mm High. IP20.
Overload: 150% x 60 seconds
Speed Control Range: 0.5-590Hz
Braking: 100% Part Time or 60% duty to minimum 25 Ohm external resistor (not supplied) - see the Linked Products below or use the 'Which Resistor' button on this page.
Integrated Keypad, 2 Analogue Inputs, 8 Digital Inputs, 2 Analogue Outputs, 2 Digital Outputs, 1 Relay Contact set, Terminals for Modbus RS485 Communications.
Input Current: 80A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz
EMC Compliance: No integrated EMC filters.
Rated 40°C Ambient.
Ventilation space in front: [not specified], above and below: 200mm, at sides: 100mm.
Heat Loss at max output: [not specified]
Mounting via holes at rear for M8 screws on 274mm x 465mm centres.
Manufacturer part number is 10G-47-0750-BN.
Download the Parker SSD AC10 Manual and Quick Start Guide from the links below:-