TEC TECDrive series AC Inverter for 1.5kW (2HP), 230V single phase motor in VxF or sensorless vector control to 7A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a standard AC Induction Motor.
Output Current: 7A
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Size 1: 161mm Wide x 178mm Deep x 232mm High
IP Rating: IP66 with UV protection for Outdoor use (Outdoor). Suitable for indoor and outdoor use.
Weight: 3.1kg
Speed Control Range: 0-500Hz
Braking: None
Fixed operator keypad with LED display
2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set
RJ45 socket for Modbus RTU or CANopen communications over RS485
Input Current: 12.9A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance (C1 EMC): IEC EN61800-3:2004 Category C1 (Industrial and Domestic). Filter can be disconnected if required.Compliance: IEC EN61800-3:2004 Category C2 (Industrial and Domestic)
Wall or Cubicle mount
Rated 40°C Ambient
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x M4 fixings at rear on 149mm x 189mm centres
Extended Warranty Available: When the TECDrive AC Inverter is used with a TEC AC motor the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
Manufacturer part number is TEC-3-120070-1F1XA, direct replacement for TEC-3-120070-1F1X
Made in the UK
Download the TECDrive Manual from the link below:-