ABB PSE Digital Soft Starter for Three Phase Motor, 200kW

ABB PSE Digital Soft Start to 370A for 200kW 400V 3 phase motor 
Starting Capacity: 4 x Motor rated current for 10 seconds

Suitable for In Line Connection only. Fitted with built in by-pass.

Trip Class 10 Rating: (Normal Duty eg. Centrifugal Pump, Compressor):
200kW, 370A @400Vac

Trip Class 30 Rating: (Heavy Duty eg. Mixer, Crusher):
160kW, 300A @400Vac

For Trip Class guidelines see ‘PSE Datasheet’ below.

Max 10 starts per hour (unable to select a larger rating)

Size: 435mm High x 190mm Wide x 236.5mm Deep. 
Minimum Clearance Requirements: 100mm side, 10mm Above, 20mm Front
IP Rating: IP00 (main circuit) IP20 (supply and control circuit)
Weight: 10.6kg

Features include:
HMI with 4 x 7 segment display, navigation and selection keys.
3 x Digital Inputs, 1 x Analogue Output 4 to 20mA, 3 x Relay Contact Sets.
Motor Thermal Overload Protection.
Ramp Time during start: 1-30s
Ramp Time during stop: 1-30s

Features:
- Voltage ramp and torque control for both start and stop
- Two-phase controlled
- Current limit
- Kick-start
- Built-in bypass for energy saving and easy installation
- Illuminated display that uses symbols to become language neutral
- External keypad rated IP66 (Type 1, 4X,12) as an option
- Analog output for display of motor current
Protections;
- Electronic overload protection
- Underload protection
- Locked rotor protection
Communication:
- Built-in Modbus RTU
- Fieldbus communication with fieldbus plug adapter and fieldbus plug

Input Voltage: 208-600Vac 3 Phase +10% -15% at 50/60Hz.
Control Supply: 110-250Vac Single Phase +10% -15%, 50/60Hz

Mounting: Cubicle mount.
Ambient Temperature: Rated at -10C to 40C without de-rating.

Part number: PSE370-600-70-1 or 1SFA897115R7001

Previous Version: PSE370-600-70. This version was 550mm (H). New version is 435mm (H)

Table of all PSE Soft Starters from 30 kW to 200 kW (this listing is shown in bold) - kW Rating at 400Vac

Useful Links: