Tec 225 Frame - 45kW 3ph 2 Pole AC Motor for 400V or 660V 3 phase supply. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 45kW (60HP) x 2950RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 10:1 Speed Control range from 295RPM to 2950RPM for 5Hz to 50Hz control, with suitable de-rating at the lower speeds. Higher speeds are possible, but contact us for this information.
Full Load Current - 80A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.88 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 400V 'Delta' connection.
Set terminal box links ‘two at one side’ for 660V 'Star' connection.
Cast Iron motor is 405mm Wide x 830mm Long x 523mm high overall in its IP55 enclosure.
Foot mount on 18.5mm holes at 356mm wide x 311mm centres 149mm back from shaft shoulder.
Flange mount on 19mm holes at 350mm PCD with 300mm diameter spigot in the 400mm diameter flange
Shaft side load is 485kg for 20,000hrs life (6313-Z-C3 bearing)- high side load bearing is available, please ask.
Weight is 230kg.
Construction is in Cast Iron frame to Eff2.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - TECC2-225M-2 B35
Download the full technical catalogue, data sheets and dimensions from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.