TEC 160kW 3ph 4 Pole High Efficiency 315L frame Cast Iron foot and flange mounting AC Motor for 400V 3 phase supply. Use with a suitable AC Frequency Inverter Drives or a fixed main supply at 50Hz.
Fixed Supply Output: 160kW (215HP).
Speed: 1490RPM.
Voltage: 400V x 50Hz 3ph.
Inverter Supply Output: 12:1 speed control range from 149RPM to 1750RPM for 5Hz to 60Hz with suitable de-rating at the lower speeds and when the optional insulated bearing is added.
Full Load Current: 273.4A at 400V.
Efficiency: 94.9% at full load.
Efficiency Class: IE2.
Power Factor: 0.89 when mains connected at 50Hz.
Dimensions: 635mm Wide x 1325mm Long x 848mm high overall.
Enclosure Rating: IP55.
Foot mount on 28mm holes at 508mm wide x 508mm centres 216mm back from shaft shoulder.
Flange mount on 8 x 24mm holes equispaced on 600mm PCD with 550mm diameter spigot in the 660mm diameter flange. When horizontal flange mounted, the feet must be supported also. Vertical shaft down mounting requires angular contact bearings, email us for more details if this is a requirement.
Weight: 1160kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for use with external over-temperature protection device.
Part Number: 160.043TECCB35-IE2, (160043TECCB35-IE2 ).
For Variable Speed use:-
Part Time Output when Inverter powered:
873Nm, 160kW (215HP) x 1750RPM at 60Hz.
1025Nm, 160kW (215HP) x 1490RPM at 50Hz.
1025Nm, 80kW 107HP) x 745RPM at 25Hz.
1025Nm, 16kW (21HP) x 150RPM at 5Hz.
Continuous Output when Inverter powered:
873Nm, 160kW (215HP) x 1750RPM at 60Hz.
1025Nm, 160kW (215HP) x 1490RPM at 50Hz.
871Nm, 68kW (91HP) x 745RPM at 25Hz.
512Nm, 8kW (10.7HP) x 150RPM at 5Hz.
Download the full Technical Catalogue from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.