Teco - IE3 7.5kW (4HP) 4 Pole AC Induction Motor 400V B35 Foot Mount 132M

ALDA-0132M0-10004-IO

Order Code: 30517
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: Teco, Range: ALDA IE3 AC Motors

TECO Westinghouse 7.5kW 3ph 4 Pole High Efficiency Foot and Flange Mounting (B35) D132M Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 7.5kW (10HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 145RPM to 2175RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.

Full Load Current – 13.8A at 400V.
Efficiency is 90.4%

300mm Wide x 502mm Long x 356mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 178mm centres 89mm back from the shaft shoulder.
Mounting: Flange mount on 4 x 15mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.

Shaft: 38mm diameter, 80mm long with 10mm key.
Weight is 60kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.

Part number is - ALDA-0132M0-10004-IO (I3-7.5-4B35)

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.

You may also be interested in...

Photo of WEG Thermistor Protector Relay RPW-PTC

WEG Thermistor Protector Relay RPW-PTC

10075636

(RPW-PTC-E05)

Order code: 28279

25+ in stock

£42.31
£41.33
£40.34
1+
5+
10+