TEC Electric - 80 Frame - 0.18kW 3ph 8 Pole B34 Foot and Face Mounting AC Motor for 230V or 400V x 50Hz 3 phase supply. Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output or a fixed frequency mains supply at 50Hz.
Fixed Main Supply Output: 0.18kW (0.3HP) x 680RPM at 230V or 400V x 50Hz 3ph.
Inverter supply output: 15:1 Speed Control range from 68RPM to 1020RPM for 5Hz to 75Hz with suitable de-rating at the lower speeds.
Full Load Current - 1.45A at 230V, or 0.84A at 400V.
Power Factor is 0.61 when mains connected at 50Hz.
Efficiency is 51% at full load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links 'two at one side' for 400V 'Star' connection.
164mm Wide x 290mm Long x 212mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 125mm wide x 100mm centres 50mm back from the shaft shoulder.
Face mount on 4 x M6 tapped holes at 100mm pcd with 80mm register in the 120mm diameter flange.
Shaft is 19mm dia x 40mm with 6mm wide key.
Allowed radial/ Axial load is 950/855 for 40,000hrs life (6204-2Z-C3 bearing)
Terminal box for 1 x M20x 1.5 Gland and terminals for M4 rings.
Weight is 9.4kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Part number is - 0.1883TECAB34
For variable Speed Use:-
Part Time Output when Inverter powered is...
1.26Nm - 0.18kW (0.30HP) x 1360RPM at 100Hz
2.53Nm - 0.18kW (0.30HP) x 680RPM at 50Hz
2.53Nm - 0.09kW (0.15HP) x 340RPM at 25Hz
2.53Nm - 0.018kW (0.031HP) x 68RPM at 5Hz
Continuous Output when Inverter powered is...
1.69Nm - 0.18kW (0.30HP) x 1020RPM at 75Hz
2.53Nm - 0.18kW (0.30HP) x 680RPM at 50Hz
2.53Nm - 0.09kW (0.28HP) x 340RPM at 25Hz
2.53Nm - 0.02kW (0.03HP) x 68RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-