TEC 132L Frame - 9.2kW 3ph 400/690V 4 pole foot and flange mounting asynchronous AC Motor. Use with Variable Frequency Drives or a fixed frequency mains supply at 50Hz. IE2 Efficiency. Class F insulation.
Can be used over a 10:1 Speed Control range from 190RPM to 1898RPM, with suitable de-rating at the lower speeds.
1500rpm synchronous speed, 1460rpm asynchronous speed at 50Hz. 1800rpm synchronous speed, 1752rpm asynchronous speed at 60Hz
Fixed mains supply output is 9.2kW (12.3HP) x 1460RPM at 400V x 50Hz 3ph.
Full Load Current - 17.7A at 400V.(10.2A@690V)
Overload - 50% for 2 minutes every 15 minutes.
PTC 130oC x 3 (1 per Phase)
Efficiency:89.7%
Power Factor is 0.85 when mains connected at 50Hz.
252mm Wide x 475mm Long x 318mm High (approx) in its IP55 enclosure (please see dimensions drawing attachment below).
Flange mount on 15mm holes at 265mm PCD with 230mm diameter register in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 56.6kg.
For Variable Speed use:-
Part Time Output when Inverter powered is...
30.70Nm - 9.2kW ( 10.05HP) x 2900 RPM at 100 Hz
60.13Nm - 9.2kW ( 10.05HP) x 1460 RPM at 50 Hz
60.13Nm - 4.6kW ( 5.03HP) x 730 RPM at 25 Hz
60.13Nm - 0.92kW (1.01HP) x 146 RPM at 5 Hz
Continuous Output when Inverter powered is...
35.30Nm - 4kW ( 5.36HP) x 2030 RPM at 70 Hz
60.13Nm - 7.5kW ( 10.05HP) x 1450 RPM at 50 Hz
41.99Nm - 3.19kW ( 4.27HP) x 725 RPM at 25 Hz
24.70Nm - 0.38kW (0.50HP) x 145 RPM at 5 Hz
Rated at 40C Ambient.
IP55
Ventilation space required at rear cooling air intake.
Full part number is - 9.243TECAB35-IE2
Download the TEC Motor Data Sheet below...