Tec 112 Frame - 5.5kW IE1 3ph 2 Pole AC Motor for 400V 3 phase supply. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Can be used over a 10:1 Speed Control range from 290RPM to 2880RPM, with suitable de-rating at the lower speeds.
Fixed mains supply output is 5.5kW (7.5HP) x 2880RPM at 400V x 50Hz 3ph.
Full Load Current - 10.5 at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.88 when mains connected at 50Hz.
220mm Wide x 395mm Long x 292mm high overall in its IP55 enclosure.
Flange mount on 4 x 15mm holes at 215mm PCD with 180mm diameter spigot in 250mm diameter flange.
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder.
Shaft is 28mm dia x 60mm long.
Shaft side load is 125kg for 20,000hrs life
Weight is 30.2kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - 5.523TECAB35-112-S2 or 5.523TECAB35-112-IE1
For Variable Speed Use:-
Part Time Output when Inverter powered is…
12.15Nm - 5.5kW (7.37Hp) x 4320rpm at 75Hz
18.2Nm - 5.5kW (7.37Hp) x 2880rpm at 50Hz
18.2Nm - 2.75kW (3.68Hp) x 1440rpm at 25Hz
18.2Nm - 0.55kW (0.73Hp) x 288rpm at 5Hz
Continuous Output when Inverter powered is…
12.15Nm - 5.5kW (7.37Hp) x 4320rpm at 75Hz
18.2Nm - 5.5kW (7.37Hp) x 2880rpm at 50Hz
15.50Nm - 2.33kW (3.13Hp) x 1440rpm at 25Hz
9.117Nm - 0.27kW (0.36Hp) x 288rpm at 5Hz
Download the tec Motor details and drawing from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.