TEC IE2 200kW Cast Iron 4 Pole 3ph AC Motor for Speed Control 315L B3 Foot

200.043TECCB3-IE2

Order Code: 25431
Photo of TEC IE2 200kW Cast Iron 4 Pole 3ph AC Motor for Speed Control 315L B3 Foot
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECC IE2 Three Phase Cast Iron

TEC - 200kW 3ph 4 Pole IE2 High Efficiency 315L frame, Cast Iron AC Motor for 400V 3 phase supply.  Use with a suitable AC Frequency Inverter Drive or a fixed mains supply at 50Hz. 

Fixed Main Supply Output:  200kW (268HP) x 1490RPM at 400V x 50Hz 3ph.  .
Inverter Supply Output:  12:1 speed control range from 149RPM to 1750RPM for 5Hz to 60Hz  with suitable de-rating at the lower speeds.
 

Full Load Current - 334.4A at 400V.
Efficiency is 94.9% at full load.
Power Factor is 0.89 when mains connected at 50Hz.

Foot mount on 28mm holes at 508mm wide x 508mm centres 216mm back from shaft shoulder.
 

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistors are included for over-temperature protection.

Part number is - 200.043TECCB3-IE2

Download the full Technical Catalogue from the link below...

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.