TEC Electric - 0.12kW 3ph 4 Pole Foot/Face(B34) Mounting 63 Frame AC Motor for 230V and 400V x 50Hz 3 phase supply. Use with any Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output or a fixed frequency mains supply at 50Hz
Fixed Mains Supply Output: 0.12kW (0.16HP) x 1350RPM at 230V or 400V x 50Hz 3ph.
Inverter Drive Supply Output: 10:1 Speed Control range from 135RPM to 2025RPM, with suitable de-rating at the lower speeds.
Included double insulated thermistor fitted as standard
Full Load Current - 0.95A at 230V, or 0.55A at 400V.
Power Factor is 0.64 when mains connected at 50Hz.
Efficiency is 52% at full load. - A more efficient motor is available, please see linked products below
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 1 x M16 Gland and terminals for M4 rings.
130mm Wide x 220mm Long x 173mm high overall in its IP55 enclosure.
Face mount on M5 tapped holes at 75mm pcd with 60mm dia register in the 90mm diameter flange
Foot mounted on 4 of 10mm x 7mm slotted holes @ 100mm wide by 80mm Length set back 40mm from the front face
Shaft is 11mm dia x 23mm with 4mm wide key.
Weight is 3.7kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Part number is - 0.1243TECAB34
For Variable Speed use…
Part Time Output when Inverter powered is...
0.46Nm - 0.12kW (0.16HP) x 2700RPM at 100Hz
0.93Nm - 0.12kW (0.16HP) x 1350RPM at 50Hz
0.93Nm - 0.06kW (0.08HP) x 675RPM at 25Hz
0.93Nm - 0.012kW (0.016HP) x 135RPM at 5Hz
Continuous Output when Inverter powered is...
0.59Nm - 0.12kW (0.16HP) x 2025RPM at 75Hz
0.93Nm - 0.12kW (0.16HP) x 1350RPM at 50Hz
0.75Nm - 0.051kW (0.068HP) x 675RPM at 25Hz
0.46Nm - 0.006kW (0.008HP) x 135RPM at 5Hz
Download the technical catalogue with dimensions from the link below...