11kW (15HP) 132L 400V 3ph 4 Pole B3 Foot Mounting AC Motor Absolute Encoder, Brake & Handwheel

TEC 132 Frame 11kW 3ph 4 Pole AC Motor for 400V 3 phase supply with Absolute Encoder, Brake with Hand release, and extended second shaft with squared end for Customer to supply and fit a handwheel. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.

Fixed mains supply output is 11kW (15HP) x 1460RPM at 400V x 50Hz 3ph.  Can be used over a 10:1 Speed Control range from 290RPM to 2920RPM, with suitable de-rating at the lower speeds.

Full Load Current - 21A at 400V.
Power Factor is 0.8451 when mains connected at 50Hz.
Efficiency is 88.4% at full load.
Brake with hand release requires a 24V DC supply.
Absolute Encoder is AH950-24R0RE5-02048 for details see page 50 of the attached W&S Encoder Catalogue.

270mm Wide x 501mm Long x 318mm high overall in its IP55 enclosure.
Mount via 4 x 12mm holes on 216mm x 178mm centres, 89mm back from the shaft shoulder.
Shaft is 38mm diameter x 80mm long with a 10mm wide keyway.
Second shaft at NDE is 24mm diameter with squared off ends to take a Customers supply and fit hand wheel.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - 132L2-4-TECA-B3-ABS.Enc-Br-H.Release-H.Wheel