Vascat 0/48.3/48.3kW x 0/3293/6000RPM Square Frame AC Vector Motor for 400V 3 phase supply with double flange mounting and second shaft.
132 Frame, Force Ventilated (IC06) to IP23.
Includes:- Force Cooling Fan, Intake Filter, Ball bearing at DE, Special Shaft at DE, Second Shaft at NDE for Hollow Shaft Encoder (supplied by others), Double Flange Mounting, Class 'B' Balance and Standard Finish.
Continuous Output: 48.3kW.
Overload: 150% to S6 (40%), subject to reduced maximum speed.
Base Speed: 3293RPM.
Maximum Speed at Full Output: 6000RPM.
Torque to Base Speed: 140Nm.
Torque at Maximum Speed: 77Nm.
Full Load Current: 92A.
Voltage: 400V 3 Phase.
Supply Frequency: 111/202Hz at Base/Maximum Speed.
Magnetising Current: 39.8A.
Overall Dimensions: 279mm Wide x 413mm Long Carcas (excluding the shafts) x 555mm high overall.
Mounting: For suspension between two Flanges each having 18mm holes at 300mm pcd with 250mm diameter register.
Weight: 115kg.
Rotor Inertia: 0.061kgm2.
Drive End Shaft: 48mm diameter x 150mm from shoulder with 2 x 14mm wide keyways.
Non Drive End Shaft: 25mm x 82mm (or special length specified with order) without keyway to take Heidenhain ECN/ERN 100 series Incremental Encoder or similar having 25mm bore size.
Drive End Bearing: Ball Bearings for a direct connected load.
Bearing Protection: Not usually required at this size (Optional Insulated Bearing and/or standard or High Speed Low Friction bypass Brush/Brushes available, on request)
Ambient Temperature: 40C at up to 1000m above sea level.
Cooling: Force Ventilation Fan with Intake Filter fitted on top at 0.37kW for 400V 3ph 50Hz supply at 1.11A.
Terminal Box position: On Top.
Part number: MAC-QI 132M-142 OV16000299-Sp
Download the standard MAC-QI-132M Dimension drawing and output curves from the link below (arrangement drawing to be provided when ordered)...