TEC 80 Frame - 0.37kW 3ph 6 Pole B3 Foot Mounting AC Motor fitted with a 1024PPR encoder,(NO Force Vent (FVU)), Thermistors for 230V or 400V 3 phase supply. Use with Closed Loop Flux Vector Inverter Drives having 1ph or 3ph input and 3ph output.
Nominal Speed is 890RPM at 230V or 400V x 50Hz 3ph and can be used between 25 to 75Hz Frequency range or 1000:1 Speed Control range from 1.08RPM to 1068RPM (0.1Hz to 100Hz) continuously if fiited with a separately excited force vent fan(Not fitted).
Full Load Current - 2.2A at 230V, or 1.27A at 400V.
Power Factor is 0.69 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links 'two at one side' for 400V 'Star' connection.
Terminal box for 1 x M20 gland.
163mm Wide x 339mm Long x 213mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 125mm wide x 100mm centres 50mm back from shaft shoulder.
Shaft is 19mm dia x 40mm with 6mm wide key.
Weight is 11.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistors included for over-temperature protection.
Part number is - 0.3763TECA B3-ENC-1024
For units which do not have a separately excited Force Vent Fan the speed range would be liited to 25Hz to 75Hz using the standard motor driven fan
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.67Nm - 0.37kW (0.5HP) x 1780RPM at 100Hz
3.97Nm - 0.37kW (0.5HP) x 890RPM at 50Hz
3.97Nm - 0.18kW (0.25HP) x 445RPM at 25Hz
3.97Nm - 0.037kW (0.05HP) x 89RPM at 5Hz
Continuous Output when Inverter powered is...
0.67Nm - 0.37kW (0.5HP) x 1780RPM at 100Hz
3.97Nm - 0.37kW (0.5HP) x 890RPM at 50Hz
3.02Nm - 0.141kW (0.188HP) x 445RPM at 25Hz
1.31Nm - 0.012kW (0.016HP) x 89RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-