Siemens SINAMICS PM240 Power Module for 0.37kW (0.5HP) 400V Three Phase Motor to 1.3A at High Overload or 0.55kW (0.75HP) to 1.7A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
POWER MODULE ONLY:- Add a compatible G120 Series Modular Control Unit and Operator Keypad to complete the G120 Inverter Drive.
Size A - 73mm Wide x 165mm Deep x 196mm High (excluding Control Unit). IP20.
Weight: 1.5kg
0.37kW, 1.3A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. (High Overload / Constant Torque)
0.55kW, 1.7A 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. (Fan/Pump Rated / Variable Torque)
Braking (DBr): 370 Ohm minimum external resistor (not supplied). Only fit resitor if Dynamic Braking is required. Use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%.
Input Current: 2A at High Overload, 2.3A when Fan/Pump rated.
EMC Filter: Integrated filters to IEC EN61800-3 Category C2 (Industrial and restricted domestic).
Cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 100mm
Ventilation space above: 80mm
Ventilation space below: 100mm
Heat Loss at max output: 40W
Mounting via 4 x M4 Fixings at rear on 180mm x 62.3mm centres.
Manufacturer part number is 6SL3210-1PE13-8AL1.
Replaces: 6SL3224-1KE11-8AP2.
Download the Siemens SINAMICS G120 Power Module PM240-2 Installation Manual from the link below:-