Vacon NXP IP21 High Performance AC Frequency Inverter for 37kW 400V 3 Ph motor in VxF or Sensorless Vector control to 72A at high overload, or 45kW to 87A when Fan/Pump rated. Simple to set up for a standard AC Induction motor.
Dimensions: Frame 7, 237mm Wide x 257mm Deep x 591mm High.
Enclosure: IP21.
Overload: 150% x 60 seconds and 200% x 2 seconds and at High Overload , or 110% Output Current x 60 seconds when Fan/Pump rated.
Speed Control Range: 0-320 Hz (standard).
Braking: To minimum 6.5 Ohm (maximum 11 Ohms) external resistor (not supplied), see the Linked Products below or use the 'Which Resistor' button on this page.. Maximum Current, 111A.
Supplied with Standard Keypad (Alpha Numeric).
Features - 2 Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 2 Relay Contact sets.
Parameter setting via keypad or from a PC using 'NCDrive' software (RS232C cable required - optional)
Input Current: as output current.
Input Voltage: 380V to 500V -15%/+10% at 50-60Hz (± 10%).
EMC Filters to EN61800-3 category C2 1st and 2nd environments (Domestic and Industrial).
Mounting: Wall mount or cubicle mounting on 4 x 9mm holes at rear. (175mm x 635mm)
Ambient Temperature: Rated at 40°C.
Ventilation space required above: 300mm.
Ventilation space required below: 100mm.
Ventilation space at sides: 80mm.
Part Number: NXP00875-A2H1SSS-A1A2000000 or 135X9219 (NXP00875A2H1SSSA1A2)
Download the Vacon NXP Manual from the link below:-