Mitsubishi FR-A700 Series AC Frequency Inverter for 18.5kW (25HP) 400V 3 Ph motor to 38A at high overload, or 22kW (30HP) to 47A when Fan/Pump rated, operates in VxF, Sensorless Vector control or full closed-loop Flux Vector Control (with optional Encoder Feedback Card). Simple set-up and ready to run from its default settings.
Size 4 - 250mm Wide x 190mm Deep x 400mm High. IP20
Overload - 150% x 60 seconds, 200% x 3 seconds (High Overload)
Overload - 110% x 60 seconds, 120% x 3 seconds (Fan/Pump Rated)
Speed Control Range - 0.2Hz to 400Hz.
Braking - To 26 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
3 Analogue Inputs, 12 Digital Inputs, 2 Analogue Outputs, 5 Digital Outputs, 2 Relay Contact Sets, integrated PLC functions and RS485 Modbus-RTU
Input Current - 44.6A at high overload or 55.2A when Fan/Pump rating set.
Input Voltage - 380-480V Three Phase +10% -15% at 50/60Hz ±5%
EMC Filters to BSEN61800-3 for the 2nd Environment (Industrial).
Wall mount in clean environment or cubicle mount.
Rated -10° to 50°C Ambient (40° when Fan/Pump rated).
Ventilation space in front 50mm
Ventilation space above and below - 100mm.
Ventilation space at sides - 50mm.
Heat Loss at max output - 540W.
Mounting via 4 x 10mm diameter holes at rear on 230mm x 380mm centres.
Full part number is - FR-A740-00470-EC
Download the A700 Manual, Installation Guide and Progamming Manual from the links below:-