Parker SSD Drives 650 Series AC Frequency Inverter for 0.37kW (0.5HP) 230V 3 Ph motor in VxF control to 2.2A without EMC Filter. Simple set-up and ready to run from its default settings.
From September 2015 the Parker SSD 650 Series is no longer available. The manufacturer recommends that customers migrate to an AC10 of equivalent rating. If an AC10 is not suitable, a 650G can be used as a direct replacement. See linked products below for both options.
No Keypad included. See linked products below for equivalent with Keypad. Includes RS232 port for keypad remote mounting.
Size 1 - 73mm Wide x 142mm Deep x 137mm High.
Overload - 150% x 30seconds.
Speed Control Range - 0/240Hz.
Braking - None.
2 x Analogue Inputs, 3/4 Digital Inputs, 1 Analogue output, 1/2 Digital outputs (one relay and one programmable in/out).
Input Current - 6.2A (12A surge x 10mS).
Input Voltage - 220/240V single phase +-10% at 50/60Hz.
EMC Filters - None fitted.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 32W.
Mounting onto symmetrical DIN rail or use the detachable clip for screw fixing.
Full part number is - 650-21122010-000P00-A0 - Was 650-003-230-0-00-0-UK-0-0
Exactly the same as SSD Drives, Eurotherm Drives and RS - 650-003-230-0-01-0-UK-0-0. This product has been sold under many other names including; KIMO, RS Components, Baldor and Newlec.
Replaces:- 582/0375/1/0/00/00, 582/0375/1/1/00/00, 582/0375/1/2/00/00, 582/0375/1/0/01/00, 582/0375/1/1/01/00, 582/0375/1/2/01/00, 582/0375/1/0/00/01, 582/0375/1/1/00/01, 582/0375/1/2/00/01, 582/0375/1/0/01/01, 582/0375/1/1/01/01, 582/0375/1/2/01/01, 601/003/230/0/00/UK, 601/003/230/0/01/UK,