Mitsubishi Automation E820 Series AC Frequency Inverter for 0.1kW 230V 3 Ph motor in VxF or Sensorless Vector control to 0.8A. Converts single phase 230V input to three phase 230V for a standard AC Induction Motor or Permanent Magnet Synchronous Motor.
Size 1a: 68mm Wide x 81mm Deep x 128mm High
Protection: IP20
0.5kG
Output: 0.8A, 0.1kW at 230V
Overload: 150% for 60 Seconds and 200% for 3 seconds.
Speed Control Range: 0.2 to 400Hz.
Braking (DBr): None.
Fixed Keypad with Front Mounted Potentiometer.
2 x Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 1 Relay Contact set and 2 Digital Outputs.
Fieldbus: RS485, MODBUS RTU Protocol via PU Connector. For connection details see the communications manual below.
Programmable from the Keypad, PC via FR-Configurator software, or from the 10 key hand-held parameter unit (see Linked Products below).
Safety Features: Safe Torque Off (STO) up to SIL2/PLd. Links need to be removed and replaced with suitable safety circuit to activate. Dual Channel Input and Monitor Output.
EMC Filter: None (Unfiltered). See linked products below for external footprint EMC Filter Module.
Input Current: 2.3A Can be improved to 1.4A if an additional DC Choke is fitted.
Input Voltage: 200-240V single phase -15%, +10% at 50/60Hz +/- 5%.
Cubicle Mount
Ambient Temperature 50°C
Mount via 1 x 5mm hole (top) and 2 x 5mm slots (bottom) on 68mm (H) x 56mm (W) centres
Ventilation Space: 100mm above, 100mm below, 10mm at sides and 10mm in front.
Heat Loss at max output: 11W.
Full part number is: FR-E820S-0008-4-60. Replaces: FR-E720S-008SC-EC. Alternative Part Number: FR-E820S-0.1K-4-60