LS M100 Series AC Inverter for 0.4kW (0.5HP) 230V 3 Ph motor in VxF control to 4.2A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Output Current: 4.2A
Overload: 150% x 60 seconds every 10 minutes
Size 2: 85mm Wide x 123mm Deep x 153mm High. IP20.
Weight: 0.76kg.
Speed Control Range: 0-400Hz
Braking: Not Available.
Fixed 7 Segment Keypad with Speed Potentiometer
2 Analogue Input, 5 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, (1 x 3 terminal,, 1 x 2 terminal).
RJ45 port for remote keypad, see linked products below.
Input Current: 7.1A
Input Voltage: 200-240Vac Single Phase +10%, -15% at 50-60Hz
EMC Compliance: IEC EN61800-3 Category C2 (restricted Domestic). Filters can be disabled with the addition of a plastic washer (provided).
Cubicle mount.
Rated Ambient: 50°C
Ventilation space above and below: 100mm, 50mm at sides (single unit): 50mm at front
Heat Loss at max output: Not Given
Mounting via 35mm DIN rail or 4 x holes at rear for 4.5mm screws on 75mm x 153mm centres.
Manufacturer part number is LSLV-0008-M100-1EOFNA (LV0008M100-1EOFNA)
Manufacturer recommends that this should replace previous generation iC5, SV004iC5
Download the LS M100 Manual from the links below:-