TEC Force Ventilation Fan for 160 Frame Motor, 230V/400V 3ph

G-160B2

Order Code: 31346
Photo of TEC Force Ventilation Fan for 160 Frame Motor, 230V/400V 3ph
Photo of TEC Force Ventilation Fan for 160 Frame Motor, 230V/400V 3ph
Photo of TEC Force Ventilation Fan for 160 Frame Motor, 230V/400V 3ph
Photo of TEC Force Ventilation Fan for 160 Frame Motor, 230V/400V 3ph
Photo of TEC Force Ventilation Fan for 160 Frame Motor, 230V/400V 3ph
1 in stock (2+ normally 5-7 days)
Order by 3pm for next working day delivery*
£255.00
(excl. VAT)
£306.00
(inc. VAT )
Price break
per unit
1+
£255.00
5+
£242.25
10+
£229.50

Condition: New with Warranty
Brand: TEC Electric Motors, Range: Force Vent Kits

TEC Electric Force Cooling Kit (known as a 'Force Vent Kit') for use with an 160 Frame Aluminium or Motor.

Replaces the existing fan cowl and shaft mounted fan of an AC motor to provide IC416 form of cooling (Totally Enclosed Over-Blown), while maintaining its IP55 degree of protection.
Allows an Inverter Drive controlled AC Motor to be run continuously at low speeds, without de-rating.  Converts a standard motor to be suitable as an Extruder Motor, Conveyer Motor and many other constant torque applications.
Also allows for high speed use, when a shaft mounted fan would otherwise absorb excessive power, at increased noise level.

Supply Required: Three phase 230V/400V x 50Hz at 0.35A/0.2A
Supply Load: 60W
Speed: 1400RPM
Air Volume: 609m³/Hr at 40Pa
Noise: 72dB(A)
Enclosure Rating: IP55

Dimensions: 311mm inside diameter, 315mm o.d. x 262mm long.  Adds 120mm to the length of a standard motor.
Mounting: via 4 or 8 x slots 7mm wide x 24mm

Manufacturers Part Number: FORCEVENT-160A-400V (Also known as G-160B2, FV-160B or G-160B)

Download the data sheet and dimensions from the links below -