Control Station supplied with Start pushbutton, Stop Pushbutton and Potentiometer. Pushbuttons and Potentiometer are supplied as loose items, assembly is required.
Control Station Size: 150mm W x 79mm H x 58mm D. IP66.
Fixing: 4 x M4.5mm holes on 137mm W x 66.7mm D centres
Overall Depth increases by 30mm with the control gear fitted.
Control Station Material: Plastic
List of items supplied:
1 x WEG PBW-3 Grey Control Station (31712) and 1 x M20 Cable Gland
1 x WEG Red Momentary Stop Pushbutton (29989) and 1 x Normally Closed Contact Block (30362)
1 x WEG Green Momentary Start Pushbutton (29992) and 1 x Normally Open Contact Block (30363)
1 x IDS Single Turn 10k Potentiometer (31252)
1 x Pack of legends for Control Station.
1 x 3m Control Cable. 0.5mm, 12 core, unscreened
Contact Blocks attach to the rear half of the control station
Contact Blocks are required to be fitted directly behind the pushbuttons for operation.
This product is supplied as individual loose items as listed above. No wiring instructions are provided as this varies between AC Inverters. Please refer to the AC Inverter manual for full details.
When used with an AC Inverter the AC Inverter should be configured for 3-wire control if this meets the safety requirements of your application.
For AC Inverters that have an IDS Easy Start Guide, details of how to wire pushbuttons for 3-wire control and an external potentiometer are given.
Order Code: IDS-Pendant-P31