Three Phase Output Sine Filter for 400V 3 phase 30kW Inverter Drives to 60A.
Use this as an output choke for long cable runs, up to 600m. Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.
This product is used to reduce peak Voltages applied at the motor for old or vulnerable motors and very long cable runs.
Rating: 60A maximum continuous.
Inductance: 0.95mH
Capacitance: 6.8µF
Losses: 230W
Overload: 150% for 60 seconds every hour.
Voltage: 500V 3 phase.
Switching Frequenciy: from 1.5kHz to 4kHz.
Enclosure Rating: IP00.
Dimensions: 240mm wide x 180mm x 285mm high.
Mounting: 10mm x 18mm slots on 185mm x 105mm centres (image 4).
Connections: Clamps for 35mm² cable.
Weight: 27kg.
Manufacturer: REO
Part number: N-CNW933/60.
The three main reasons to use this product are...
1) Output choke/sine wave filter for cleaning up the sine wave and reducing common mode noise.
2) It also allows the installation of long cable runs, up to 600m. Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.
3) This product reduces peak Voltages applied at the motor for old or vulnerable motors.
Download the dimension drawing from the link below...