Sine Filter for 22kW (48A) Inverter - CNW933/48

CNW933/48

Order Code: 19408
Photo of Sine Filter for 22kW (48A) Inverter - CNW933/48
Photo of Sine Filter for 22kW (48A) Inverter - CNW933/48
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: REO UK Ltd, Range: Sine Filter

Three Phase Output Sine Filter for 22kW Inverter Drives to 48A.

Replaced by NCNW933/48

Rating...
48A maximum continuous
Overload is 150% for 60 seconds every hour.
400V Three phase
Suitable for Inverter switching frequencies from 3kHz to 8kHz.
IP20 enclosure rating

240mm wide x 300mm high x 185mm deep.
10mm fixing holes on 185mm x 85mm centres.
Screw terminal connections for up to 35mm² cable
Weight is 28kg

Manufacturer is REO
Part number is CNW933/48

The three main reasons to use this product are...
1) Output choke/sine wave filter for cleaning up the sine wave and reducing common mode noise.
2) It also allows the installation of long cable runs, up to 600m. Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.
3) This product reduces peak Voltages applied at the motor for old or vulnerable motors.

Download the dimension drawing from the link below...