Sine Filter for 18kW (37A) Inverter CNW933/37

CNW933/37

Order Code: 19501
Photo of Sine Filter for 18kW (37A) Inverter CNW933/37
Photo of Sine Filter for 18kW (37A) Inverter CNW933/37
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: [NA], Range: Chokes, Sine Filters and Transformers

Three Phase Output Sine Filter for 18kW Inverter Drives to 37A.

Replaced by NCNW933/37

Rating:-
Current: 37A maximum continuous.
Overload: 150% for 60 seconds every hour.
Heat Loss:  160W at full load.
Voltage: 400V Three phase.
Inverter Switching Frequency: From 3kHz to 8kHz.
Enclosure Rating: IP20.

Dimensions: 240mm wide x 290mm high x 160mm deep.
Mounting: via 10mm fixing holes on 185mm x 85mm centres.
Connections: Provision for up to 16mm² cable.
Weight: 25kg.

Manufacturer: REO
Part Number: CNW933/37

The three main reasons to use this product are...
1) Output choke/sine wave filter for cleaning up the sine wave and reducing common mode noise.
2) It also allows the installation of long cable runs, up to 600m. Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.
3) This product reduces peak Voltages applied at the motor for old or vulnerable motors.

Download the dimension drawing from the link below...