638 AC Servo Drive controller for Torque, Speed and Position Control of a Brushless AC Servo motor to 10A.
Features:-
'Safe Torque Off'
Ready tuned current loop from extensive motor library.
Fully Programmable move, math and sequence functions.
For standard two pole resolver feedback (other feedback options are available).
Additional Encoder input or output for follower or master encoder function.
Internal braking resistor.
Provision for additional external resistor at 100 ohms minimum
10A continuous rating x 400V AC output
200% x 5 second overload to 100% RMS
Input is 400V 3 phase (maximum is 460V +-10%), 565VDC
Requires 24V DC control supply.
Features:
F: Intergrated Filter
0: Without EMC Clip
STO: Safe Torque Off
PCA: Profibus DP + CAN2 +RS485
RM1: Resolver + Memory - Module 2nd Version
IP20 enclosure rating
Size B - 86mm wide x 232mm deep x 319mm high
You must add an additional 70mm in front of th drive for I/O connections.
Ventilation space above and below - 100mm.
Ventilation space at sides - 4mm.
Weight is 4.4kg
Suitable for use with Parvex NX, EX, SSD and ASB ACMn and ACM2n Servo Motors.
Manufacturers full part number - 638B106F0STOPCA000RM1 (638B/10/6/F/0/STO/PCA/000/RM1).
'638' is a development of the 637 Series servo drive and is the 6th Generation of this product. Previous versions were 637F as the 'Fast' design replacing the 637.
Sold under various names including SSD Drives, Eurotherm Drives, ASB Apollo 3G, Samson 3G and Parker Hannifin.
Download the 638 Manual from the link below...