WEG W22 IE3 Cast Iron 200kW Three Phase Motor 400V/690V 4 Pole 315L Frame B3

12862505

Order Code: 32816
Available to Order
Delivery normally 15 weeks
£14,056.00
(excl. VAT)
£16,867.20
(inc. VAT )
Price break
per unit
1+
£14,056.00

Condition: New with Warranty
Brand: WEG, Range: W22 Three Phase IE3 Cast Iron

WEG W22 Cast Iron Premium Efficiency (IE3) 200kW 4 Pole 3 phase AC Motor.
315L Frame, B3 Foot Mount with top mounted terminal box.

Power: 200kW at 400V or 690V 50Hz.
Speed: 1488rpm at 50Hz.
Torque: 1284Nm at 50Hz.
Full Load Current with links in DELTA (400V 3ph): 346A
Full Load Current with links in STAR (690V 3ph): 201A.
Power Factor: 0.87 when mains connected at 50Hz.
Efficiency: 96% (IE3) at 50Hz.

For use with Variable Frequency Drives or a fixed frequency 400V three phase mains supply at 50Hz.
AC Inverter Maximum Speed: 75Hz, 2232rpm. Reduced Torque rating from 50Hz to 75Hz. 
AC Inverter Minimum Speed: 5Hz, 149rpm. Reduced Torque rating from 25Hz to 5Hz if continually operated in this speed range.
Performance details of the motor with an AC Inverter are given in the datasheet below.
Set terminal box links 'three a-breast' for 400V 'Delta' connection. Delta connection is required when using a 400V three phase AC Inverter or when connected directly to a 400V three phase mains supply.
Set terminal box links ‘two at one side’ for 690V 'Star' connection. 

IP55 TEFC (Totally Enclosed Fan Cooled) IC411. (Fan will rotate the same speed as the motor shaft)
657mm Wide x 1385mm Long x 891mm High. (Overall dimensions including shaft)
Foot mount on 28mm holes with 508mm wide x 508mm centres 216mm back from shaft shoulder.
Shaft: 80mm diameter x 170mm long.
Motor Housing: Cast Iron.
Weight: 1329kg.

Rated at 40C Ambient. (Ventilation space required for air intake)
Thermistors: 1 per phase
Bearings: Ball Bearings. Type: 6319 C3(Drive End). 6316 C3(NDE)

Extended Warranty Available: When purchased with a WEG AC Inverter (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.

Part number: 12862505

Drawing and data sheet downloads:

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.

You may also be interested in...

Photo of WEG CFW11 IP20 200kW/250kW 400V 3ph AC Inverter Drive,  HMI, STO, C3 EMC

WEG CFW11 IP20 200kW/250kW 400V 3ph AC Inverter Drive, HMI, STO, C3 EMC

CFW11 0477 T4 OYZ

(11335540)

Order code: 27219

10+ in stock

£9,034.66
1+