ABB IE2 7.5kW three phase 4 pole B5 Flange mounting 132M frame AC Induction Motor for 400V 3 phase supply.
Output: 7.5kW 1450rpm at 400V 50Hz
Speed Range from an Inverter Supply: From 5 Hz, 146rpm to 100Hz, 2920rpm.
If operated for long periods of time below 25Hz then the motor rating will be reduced.
Constant Power Speed Range: 1460rpm to 2900rpm continuously.
Full Load Current with links in Δ (Delta) 400V 3ph: 16.2A.
Full Load Current with links in Y (Star) 690V 3ph: 9.3A.
Torque: 49.38Nm at 50Hz.
Power Factor: 0.75 at 50Hz.
Efficiency at 100% Load: 88.6%
Efficiency at 75% Load: 89.2%
Efficiency at 50% Load: 88.4%
Terminal box position: Top.
Enclosure rating: IP55.
Dimensions: 300mm wide x 524mm long x 300mm high overall.
Mounting: IM001 IMB5. Mounted on 8 x 14.5mm holes with a 265mm pcd, 230mm spigot, 300mm outer diameter flange.
Shaft: 38mm diameter, 80mm long. Fitted with 10mm wide key.
Construction: Aluminium
Weight: 48kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: Not Fitted
Bearings: Ball Bearing, 6208-2Z/C3 (DE), 6206-2Z/C3 (NDE)
IE2 rated motor must be used with an AC Inverter. Suitable for use with a Variable Frequency Inverter Drive having 3ph input and 3ph output.
Motor Type: M2AA132M4
Product Code: 3GAA132002-BDE
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.