ABB IE2 0.75kW three phase 2 pole B3 Foot mounting 80 frame AC Induction Motor for 230V or 400V 3 phase supply.
Output: 0.75kW 2895rpm at 230V or 400V 50Hz
Speed Range from an Inverter Supply: From 5 Hz, 289rpm to 100Hz, 5790rpm.
If operated for long periods of time below 25Hz then the motor rating will be reduced.
Constant Power Speed Range: 2895rpm to 5790rpm continuously.
Full Load Current with links in Δ (Delta) 230V 3ph: 2.94A.
Full Load Current with links in Y (Star) 400V 3ph: 1.7A.
Torque: 2.4Nm at 50Hz.
Efficiency: 80.6% (IE2)
Power Factor: 0.79 at 50Hz.
Terminal box position: Top.
Enclosure rating: IP55.
Dimensions: 200mm wide x 266mm long x 194mm high overall.
Mounting: Foot mount on 10mm holes on 125mm x 100mm centres 50mm back from the shaft shoulder.
Feet: Fixed
Mounting: Flange mount on 10mm holes spaced on 125mm PCD with 50mm diameter spigot in the 100mm diameter flange.
Shaft: 19mm diameter, 40mm long.
Construction: Aluminium
Weight: 10.5kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: Not Fitted
Bearings: Ball Bearing, 6204-2Z/C3 (DE), 6203-2Z/C3 (NDE)
IE2 rated motor must be used with an AC Inverter. Suitable for use with a Variable Frequency Inverter Drive having 1ph** or 3ph input and 3ph output.
Motor Type: M2AA80B2 (M2AA 80B 2)
Product Code: 3GAA081212-ASE
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.