ABB IE2 0.18kW three phase 4 pole B3 Foot mounting 63 frame AC Induction Motor for 230V or 400V 3 phase supply.
Output: 0.18kW 1370rpm at 230V or 400V 50Hz
Speed Range from an Inverter Supply: From 5 Hz, 137rpm to 100Hz, 2740rpm.
If operated for long periods of time below 25Hz then the motor rating will be reduced.
Constant Power Speed Range: 1370rpm to 2740rpm continuously.
Full Load Current with links in Δ (Delta) 230V 3ph: 1.16A.
Full Load Current with links in Y (Star) 400V 3ph: 0.67A.
Torque: 1.25Nm at 50Hz.
Efficiency: 63.5% (IE2)
Power Factor: 0.61at 50Hz.
Terminal box position: Top.
Enclosure rating: IP55.
Dimensions: 140mm wide x 220mm long x 170mm high overall.
Mounting: Foot mount on 7mm holes on 100mm x 80mm centres 40mm back from the shaft shoulder.
Feet: Removable
Mounting: Flange mount on 7mm holes spaced on 100mm PCD with 40mm diameter spigot in the 80mm diameter flange.
Shaft: 11mm diameter, 23mm long.
Construction: Aluminium
Weight: 4.2kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: Not Fitted
Bearings: Ball Bearing, 6201-2Z/C3 (DE), 6201-2Z/C3 (NDE)
IE2 rated motor must be used with an AC Inverter. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output.
Motor Type: M2AA63B4 (M2AA 63B 4)
Product Code: 3GAA062002-AS
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.