Marelli - 0.09kW 3ph 6 Pole 63 Frame Foot and Flange Mounting AC Motor for 230V or 400V x 50Hz 3 phase supply. Use with Variable Frequency Inverter Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Main Supply Output: 0.09kW (0.12HP) x 680RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 88RPM to 1232RPM for 5Hz to 70Hz with suitable de-rating at the lower speeds.
Full Load Current - 0.83A at 230V, or 0.48A at 400V.
Power Factor is 0.56 when mains connected at 50Hz.
Efficiency is 48% at full load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
132mm Wide x 254mm Long x 188mm high overall in its IP55 enclosure.
Foot mount on 7mm holes at 112mm wide x 90mm centres 45mm back from shaft shoulder.
Flange mount on 9mm holes at 130mm pcd with 110mm diameter register in the 160mm diameter flange.
Shaft is 14mm dia x 30mm with 5mm wide key.
Shaft side load is 51kg for 20,000hrs life.
Terminal box for 1 x M20 Gland and terminals for M4 rings.
Weight is 6kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - MAA63MA6 B35
Output for Variable Speed use…
Part Time Output when Inverter powered is...
0.98Nm - 0.18kW (0.25HP) x 1760RPM at 100Hz
1.95Nm - 0.18kW (0.25HP) x 880RPM at 50Hz
1.95Nm - 0.09kW (0.125HP) x 440RPM at 25Hz
1.95Nm - 0.018kW (0.025HP) x 88RPM at 5Hz
Continuous Output when Inverter powered is...
1.4Nm - 0.18kW (0.25HP) x 1232RPM at 70Hz
1.95Nm - 0.18kW (0.25HP) x 880RPM at 50Hz
1.66Nm - 0.076kW (0.1HP) x 440RPM at 25Hz
0.88Nm - 0.009kW (0.012HP) x 88RPM at 5Hz
Download the Marelli MAA Technical Manual from the link below...