Marelli - High Efficiency 132 Frame 5.5kW 3ph 2 Pole Foot and Flange Mounting AC Motor for 400V x 50Hz 3 phase supply. Use with any Variable Frequency Inverter Drive, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 5.5kW (7.5HP) x 2915RPM at 400V x 50Hz 3ph
Inverter supply output: 12:1 Speed Control range from 292RPM to 3498RPM for 5Hz to 60Hz with suitable de-rating at the lower speeds.
Full Load Current - 10.1A at 400V.
Power Factor is 0.9 when mains connected at 50Hz.
Efficiency is 87.1% at full load, 87.2% at 75% load and 85% at half load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 2 x M25 Glands
259mm Wide x 467mm Long x 332mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from shaft shoulder.
Flange mount on 4 x 15mm holes at 265mm pcd with 230mm diameter register in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 45.3kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Part number is - MAQ132SA2 B35
For Variable Speed use:-
Part Time Output when Inverter powered is...
15Nm - 5.5kW (7.5HP) x 3498RPM at 60Hz
18Nm - 5.5kW (7.5HP) x 2915RPM at 50Hz
18Nm - 2.75kW (3.75HP) x 1458RPM at 25Hz
18Nm - 0.55kW (0.75HP) x 292RPM at 5Hz
Part Time Output when Inverter powered is...
15Nm - 5.5kW (7.5HP) x 3498RPM at 60Hz
18Nm - 5.5kW (7.5HP) x 2915RPM at 50Hz
15.3Nm - 2.34kW (3.1HP) x 1458RPM at 25Hz
9Nm - 0.275kW (0.4HP) x 292RPM at 5Hz
Download the Dimensions and MAQ Motor Technical Catalogue from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.