TEC IE2 45kW Cast Iron 400V 3ph 4 Pole AC Motor, B3 Foot, Cast Iron

Tec 225M Frame 45kW 3ph 4 Pole AC Motor for 400V or 660V 3 phase supply.  For use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.

Speed Control Range when Inverter Powered:  15:1 from 150RPM to 2250RPM, with suitable de-rating at the lower speeds.

Fixed mains supply output:  45kW (60HP) .
Speed:  1475RPM.
Voltage:  400V x 50Hz 3ph.

Full Load Current:  80A at 400V.
Power Factor:  0.87 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 400V 'Delta' connection.
Set terminal box links ‘two at one side’ for 660V 'Star' connection.

Contruction:  Cast Iron.
Dimensions:  435mm Wide x 845mm Long x 560mm high overall.
Enclosure Rating:  IP55.
Foot mount on 18.5mm holes at 356mm wide x 311mm centres 149mm back from shaft shoulder. 
Shaft:  60mm Diameter x 140mm Long (see page 32 of attached manual).
Shaft side load:  485kg for 20,000hrs life (6313-Z-C3 bearing) (high side load bearing is available for belt side load, please ask).
Weight:  309kg.
Efficiency Class Eff2.

Ambient:  Rated at 40C.
Ventilation space required at rear cooling air intake.

Part Number:  45.043TECCB3-IE2.

For Variable Speed use…

Part Time Output when Inverter powered...
195Nm, 45kW (60HP) x 2250RPM at 75Hz
292Nm ,45kW (60HP) x 1475RPM at 50Hz
292Nm ,22kW (30HP) x 738RPM at 25Hz
292Nm, 4.5kW (6HP) x 148RPM at 5Hz

Continuous Output when Inverter powered is...
191Nm, 45kW (60HP) x 2250RPM at 75Hz
292Nm  45kW (60HP) x 1475RPM at 50Hz
247Nm, 19kW (25.5HP) x 738RPM at 25Hz
146Nm, 2.25kW (3HP) x 148RPM at 5Hz

Download the full technical catalogue, data sheets and dimensions from the link below...