Marelli 200 Frame - 30kW 3ph 2 Pole High Efficiency AC Motor for 400V or 660V 3 phase supply in Foot and Flange mounting (B35) form. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Can be used over a 10:1 Speed Control range from 297RPM to 2965RPM, with suitable de-rating at the lower speeds.
Fixed mains supply output is 30kW (40HP) x 2965RPM at 400V x 50Hz 3ph.
Full Load Current - 52.2A at 400V.
Power Factor is 0.9 when mains connected at 50Hz.
Efficiency is 'IE2' that is 92.1% at full load, 91.6% at 75% load and 89.9% at 50% load.
Set terminal box links 'three a-breast' for 400V 'Delta' connection.
Set terminal box links ‘two at one side’ for 660V 'Star' connection.
398mm Wide x 772mm Long x 510mm high overall in its IP55 enclosure.
Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from shaft shoulder.
Flange mount on 4 x 18mm holes at 350mm pcd with 300 spigot in the 400mm diameter flange
Shaft side load is 360kg for 20,000hrs life (6312-Z-C3 bearing)
Weight is 235kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - BAQ200LA2-IE2-B35
For Variable Speed use…
Part Time Output when Inverter powered is...
96.6Nm - 30kW (40HP) x 2965RPM at 50Hz
96.6Nm - 15kW (20HP) x 1482RPM at 25Hz
96.6Nm - 3kW (4HP) x 297RPM at 5Hz
Continuous Output when Inverter powered is...
96.6Nm - 30kW (40HP) x 2965RPM at 50Hz
82.1Nm - 12.7kW (17HP) x 1482RPM at 25Hz
48.3Nm - 1.5kW (2HP) x 297RPM at 5Hz
Download the Technical Catalogue and the full details from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.