Marelli - 0.18kW 3ph 2 Pole Face Mounting 63 Frame AC Motor for 230V and 400V x 50Hz 3 phase supply. Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 0.18kW (0.25HP) x 2710RPM at 230V or 400V x 50Hz 3ph
Inverter Supply Output: 12:1 Speed Control range from 271RPM to 3252RPM at 5Hz to 60Hz, with suitable de-rating at the lower speeds.
Full Load Current - 0.95A at 230V, or 0.55A at 400V.
Power Factor is 0.75 when mains connected at 50Hz.
Efficiency is 63% at full load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 1 x M16 Gland and terminals for M4 rings.
122mm Wide x 215mm Long x 173mm high overall in its IP55 enclosure.
Face mount on M5 tapped holes at 75mm pcd with 60mm dia register in the 90mm diameter flange.
Shaft is 11mm dia x 24mm with 4mm wide key.
Shaft side load is 25kg for 20,000hrs life (6201-2Z bearing)
Weight is 4kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Part number is - MAA63MA2-B14 (MAA 63 MA2 B14)
For Variable Speed use…
Part Time Output when Inverter powered is...
0.53Nm - 0.18kW (0.25HP) x 3252RPM at 60Hz
0.63Nm - 0.18kW (0.25HP) x 2710RPM at 50Hz
0.63Nm - 0.09kW (0.12HP) x 1355RPM at 25Hz
0.63Nm - 0.018kW (0.025HP) x 271RPM at 5Hz
Continuous Output when Inverter powered is...
0.53Nm - 0.18kW (0.25HP) x 3250RPM at 60Hz
0.63Nm - 0.18kW (0.25HP) x 2710RPM at 50Hz
0.54Nm - 0.077kW (0.103HP) x 1355RPM at 25Hz
0.32Nm - 0.009kW (0.012HP) x 271RPM at 5Hz
Download the Marelli MAA Technical Catalogue from the link below...