Marelli - High Efficiency 100 Frame 1.5kW (2HP) 3ph 6 Pole Flange Mounting AC Motor for 230V or 400V x 50Hz 3 phase supply. Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 1.5kW (2HP) x 955RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 96RPM to 1433RPM at 5Hz to 75Hz, with suitable de-rating at the lower speeds.
Full Load Current - 6.34A at 230V, or 3.66A at 400V.
Efficiency is 80% at full load, 80.2% at 75% load and 78.9% at 50%.
Power Factor is 0.74 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 2 x M25 Glands.
199mm Wide x 388mm Long x 265mm high overall in its IP55 enclosure.
Flange mount on 15mm holes at 215mm pcd with 180mm dia register in the 250mm dia flange.
Shaft is 28mm dia x 60mm with 8mm wide key.
Shaft side load is 135kg for 20,000hrs life (6206-2Z bearing)
Weight is 21.8kg.
Rated at 40C Ambient. Ventilation space required at rear cooling air intake.
Part number is - MAQ100LA6 B5 (MAQ 100 LA6 B5)
For Variable Speed use…
Part Time Output when Inverter powered is...
7.5Nm - 1.5kW (2HP) x 1910RPM at 100Hz
15Nm - 1.5kW (2HP) x 955RPM at 50Hz
15Nm - 0.75kW (1HP) x 478RPM at 25Hz
15Nm - 0.15kW (0.2HP) x 96RPM at 5Hz
Continuous Output when Inverter powered is...
10Nm - 1.5kW (2HP) x 1433RPM at 75Hz
15Nm - 1.5kW (2HP) x 955RPM at 50Hz
11.4Nm - 0.57kW (0.764HP) x 478RPM at 25Hz
4.95Nm - 0.05kW (0.066HP) x 96RPM at 5Hz
Download the Marelli MAQ technical catalogue and dimentioned drawings from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.