Marelli - 22kW High Efficiency 180 Frame 4 Pole AC Motor for 400V 3 phase supply in B5 Flange mounting form. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 22kW (30HP) x 1465RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 146RPM to 2200RPM for 5Hz to 75Hz, with suitable de-rating at the lower speeds.
Full Load Current - 42A at 400V.
Power Factor is 0.83 when mains connected at 50Hz.
354mm Wide x 723mm Long x 455mm high overall in its IP55 enclosure.
Flange mount on 4 x 18mm holes at 300mm pcd with 250 spigot.
Shaft is 48mm diameter x 110mm long
Shaft side load is 324kg for 20,000hrs life
Weight is 173kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - BAQ180L4 B5
For Variable Speed use…
Part Time Output when Inverter powered is...
71.5Nm - 22kW (30HP) x 2900RPM at 100Hz
143Nm - 22kW (30HP) x 1465RPM at 50Hz
143Nm - 11kW (15HP) x 733RPM at 25Hz
143Nm - 2.2kW (3HP) x 145RPM at 5Hz
Continuous Output when Inverter powered is...
95Nm - 22kW (30HP) x 2198RPM at 75Hz
143Nm - 22kW (30HP) x 1465RPM at 50Hz
122Nm - 9.4kW (12.5HP) x 733RPM at 25Hz
71.5Nm - 1.1kW (1.5HP) x 145RPM at 5Hz
Download the full Manual and dimensioned drawing from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.