TEC Electric 56 Frame - 0.09kW 3ph 2 Pole Foot and Flange Mounting (B35) AC Motor for 230V or 400V 3 phase supply. Use with small power Variable Frequency Drives having 1ph or 3ph input and 3ph output or a fixed frequency mains supply at 50Hz.
Can be used over a 20:1 Speed Control range from 140RPM to 2800RPM, with suitable de-rating at the lower speeds.
Thermistor overtemperature protection.
Fixed mains supply output is 0.09kW (0.12HP) x 2710RPM at 230V or 400V x 50Hz 3ph.
Full Load Current - 0.62A at 230V, or 0.36A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.72 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
110mm Wide x 195mm Long x 149mm high overall in its IP55 enclosure.
Flange mount on 4 x 7mm holes equispaced on 98mm PCD with 80mm diameter spigot in the 120mm diameter flange.
Foot mount on 5.8mm holes at 90mm wide x 71mm centres 36mm back from shaft shoulder.
Shaft is 9mm dia x 20mm with 3mm wide key.
Weight is 4kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - 56M2B-TECA-B35 (56 M2B TEC-A B35)
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.32Nm - 0.09kW (0.12HP) x 2800RPM at 100Hz
0.64Nm - 0.09kW (0.12HP) x 1350RPM at 50Hz
0.64Nm - 0.045kW (0.06HP) x 700RPM at 25Hz
0.64Nm - 0.009kW (0.012HP) x 140RPM at 5Hz
Continuous Output when Inverter powered is...
0.32Nm - 0.09kW (0.12HP) x 2800RPM at 100Hz
0.64Nm - 0.09kW (0.12HP) x 1350RPM at 50Hz
0.54Nm - 0.038kW (0.051HP) x 700RPM at 25Hz
0.32Nm - 0.0045kW (0.006HP) x 140RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-