Universal IE2 1.1kW (1 ½HP) three phase 4 pole B5R Reduced Flange mounting 80 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output. Not permitted for use without an Inverter Drive.
Output: 1.1kW (1.5HP) x 1420rpm at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 15:1 Range from 142rpm to 2130rpm for 5Hz to 75Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 1420rpm to 2130rpm continuously.
Full Load Current with links in Δ (Delta) for 230V 3ph: 4.73A.
Full Load Current with links in Y (Star) for 400V 3ph: 2.73A.
Torque: Nm at 50Hz.
Efficiency: 81.2% (IE2)
Power Factor: 0.72 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M20 gland and 1 M20 plug.
Terminal box position: Top, sides, bottom.
Enclosure rating: IP55.
Dimensions: 163mm wide x 290mm long x 219mm high overall.
Mounting: Reduced Flange B5R on 4 x M6 tapped holes at 130mm PCD with 110mm diameter register in the 160mm diameter flange.
Shaft: 19mm diameter, 40mm long with 6mm key.
Construction: Aluminium
Weight: 13.0kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: not included.
Part number: UMHA 80-4 B5R-1.1-IE2 (HE31 80 S1 4 B5R-1.1)
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.