Universal Motors 11kW 3ph 2 Pole High Efficiency Foot Flange Mounting (B35) 132M Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 11kW (15HP) x 2930RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 293RPM to 4102RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 19.7A at 400V.
Power Factor is 0.9 when mains connected at 50Hz.
Efficiency is 90.8%
300mm Wide x 505mm Long x 327mm high overall in its IP55 enclosure.
Mounting: Flange mount on 4 x 15mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm diameter x 80mm long with a 10mm wide keyway.
Weight is 47kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - UMHA 132M-2P B35 IE2
For Variable Speed use:-
Part Time Output when Inverter powered is...
25.61Nm - 11kW ( 14.75HP) x 4102 RPM at 70 Hz
35.80Nm - 11kW ( 14.75HP) x 2930 RPM at 50 Hz
35.80Nm -5.5kW ( 7.37HP) x 1465 RPM at 25 Hz
35.80m - 1.1kW ( 1.47HP) x 293 RPM at 5 Hz
Continuous Output when Inverter powered is...
25.61Nm - 11kW ( 14.75HP) x 4102 RPM at 70 Hz
35.80m - 11kW ( 14.75HP) x 2930 RPM at 50 Hz
30.48Nm - 4.68kW ( 6.27HP) x 1465 RPM at 25 Hz
17.93Nm - 0.55kW ( 0.74HP) x 293 RPM at 5 Hz
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.