Universal IE1 0.55kW (3/4HP) three phase 2 pole B35 Foot and Flange mounting 71 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency three phase mains supply at 50Hz.
Output: 550W (0.75HP) x 2760rpm at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 15:1 Range from 276rpm to 4140rpm for 5Hz to 75Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 2760rpm to 4140rpm continuously.
Full Load Current with links in Delta for 230V 3ph: 2.46A.
Full Load Current with links in Star for 400V 3ph: 1.42A.
Torque: 1.90Nm at 50Hz.
Efficiency: 71.00% (IE1)
Power Factor: 0.79 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M20 gland and 1 M20 plug.
Terminal box position: Top.
Enclosure rating: IP55.
Dimensions: 160mm wide x 241mm long x 197mm high overall.
Mounting: Foot mount on 7mm holes at 112mm wide x 90mm centres 45mm back from the shaft shoulder.
Flange mount on 4 x 10mm holes equispaced on 130mm PCD with 110mm diameter spigot in the 160mm diameter flange.
Shaft: 14mm diameter, 30mm long with 5mm key.
Construction: Aluminium
Weight: 6.00kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: not included.
Part number: UMA 71G-2 B35 or BF31 71 M2 2 B35.
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.