Universal Motors - Progressive (reduced frame)1.5kW 3ph 2 Pole High Efficiency Face Mounted (B14) 80 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 1.5kW (2HP) x 2880RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 288RPM to 4608RPM for 5Hz to 80Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 5.40A at 230V, or 3.12A at 400V.
Power Factor is 0.82 when mains connected at 50Hz.
Efficiency is 82.7%
158mm Wide x 280mm Long x 214mm high overall in its IP55 enclosure.
Face mount on 4 x M6 mm bolts at 100mm PCD with 80mm diameter register on a 120mm face.
Shaft is 19mm dia x 40mm with 6mm wide key.
Weight is 11kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - UMHA 80-2P-B14
For Variable Speed Use:-
Part Time Output when Inverter powered is…
3.11Nm - 1.5kW (2.01Hp) x 4608rpm at 80Hz
5.00Nm - 1.5kW (2.01Hp) x 2880rpm at 50Hz
5.00Nm - 0.75kW (1Hp) x 1440rpm at 25Hz
5.00Nm - 0.15kW (0.2Hp) x 288rpm at 5Hz
Continuous Output when Inverter powered is…
3.11 Nm - 1.5kW (2.01Hp) x 4608rpm at 75Hz
5.00Nm - 1.5kW (2.01Hp) x 2880rpm at 50Hz
4.18Nm - 0.63kW (0.84Hp) x 1440rpm at 25Hz
2.98Nm - 0.09kW (0.1Hp) x 288rpm at 5Hz
Please download the manufacturers data sheet below:
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.