TECO Westinghouse 5.5kW 3ph 2 Pole High Efficiency Flange Mounting (B5) D132S Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 5.5kW (7.5HP) x 2930RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 293RPM to 4395RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 11.3A at 400V.
Power Factor is 0.81 when mains connected at 50Hz.
Efficiency is 87%
258mm Wide x 462mm Long x 317mm high overall in its IP55 enclosure.
Flange mount on 4 x 14.5mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 51kg.
Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.
Part number is - ALAA-0132S0-10002-IZ (I2----5-2B5)
For Variable Speed use:-
Part Time Output when Inverter powered is...
12Nm - 5.5kW (7.5HP) x 4395RPM at 75Hz
17.9Nm - 5.5kW (7.5HP) x 2930RPM at 50Hz
17.93Nm - 2.8kW (3.69HP) x 1465RPM at 25Hz
9Nm - 0.55kW (0.41) x 293RPM at 5Hz
Continuous Output when Inverter powered is...
12Nm - 5.5kW (7.5HP) x 4395RPM at 75Hz
17.9Nm - 5.5kW (7.5HP) x 2930RPM at 50Hz
15.2Nm - 2.34kW (3.1HP) x 1465RPM at 25Hz
9Nm - 0.28kW (0.41HP) x 293RPM at 5Hz
Download the full Manual and Dimensions from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.