Teco - IE2 5.5kW (7.5HP) 4 Pole AC Induction Motor 400V B5 Flange Mount - 132 Frame

ALAA-0132S0-10004-IZ

Order Code: 24616
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: Teco, Range: ALAA IE2 Aluminium AC Motors

TECO Westinghouse 5.5kW 3ph 4 Pole High Efficiency Flange Mounting (B5) D132S Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 5.5kW (7.5HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 145RPM to 2175RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 10.8A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 87.7%

258mm Wide x 462mm Long x 317mm high overall in its IP55 enclosure.
Flange mount on 4 x 14.5mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 55kg.

Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.
Part number is - ALAA-0132S0-10004-IZ (I2----5-4B5)

For Variable Speed use:-
Part Time Output when Inverter powered is...
18.1Nm - 5.5kW (7.5HP) x 2900RPM at 100Hz
36.2Nm -  5.5kW (7.5HP) x 1450RPM at 50Hz
36.22Nm - 2.8kW (3.69HP) x 725RPM at 25Hz
18.1Nm - 0.55kW (0.41) x 145RPM at 5Hz
Continuous Output when Inverter powered is...
24.1Nm - 5.5kW (7.5HP) x 2175RPM at 75Hz
36.2Nm - 5.5kW (7.5HP) x 1450RPM at 50Hz
30.8Nm - 2.34kW (3.1HP) x 725RPM at 25Hz
18.1Nm - 0.28kW (0.41HP) x 145RPM at 5Hz

Download the full Manual and Dimensions from the link below:-

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.

You may also be interested in...

Photo of Teco A510 5.5kW/7.5kW 400V 3ph AC Inverter Drive, DBr, C3 EMC

Teco A510 5.5kW/7.5kW 400V 3ph AC Inverter Drive, DBr, C3 EMC

A510-4008-H3F

Order code: 24355

Obsolete Product, a replacement may be available

 
 
Photo of WEG CWM18 - 18A/32A 7.5kW/15kW 3 Pole Contactor, 1NO+1NC Aux, 110V AC Coil

WEG CWM18 - 18A/32A 7.5kW/15kW 3 Pole Contactor, 1NO+1NC Aux, 110V AC Coil

CWM18-11-30D13

Order code: 22511

Delivery 15 weeks

£17.41
£17.00
£16.60
1+
5+
10+
Photo of WEG RW27D-1 10-15A Thermal Overload Relay for CWM Contactors

WEG RW27D-1 10-15A Thermal Overload Relay for CWM Contactors

RW27-1D3-U015

(10452384)

Order code: 22604

10+ in stock

£19.65
£19.19
£18.74
1+
5+
10+
Photo of Pujol 5.5kW (7.5HP) 135RPM 10.7:1 In-Line Gearbox for 132 Frame motor

Pujol 5.5kW (7.5HP) 135RPM 10.7:1 In-Line Gearbox for 132 Frame motor

SPC 160/10.7/300-38

Order code: 29238

Obsolete Product, a replacement may be available