TEC Electric - 5.5kW 3ph 4 Pole Low Efficiency Foot and Flange Mounting (B35) 132S Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 5.5kW (7.5HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 145RPM to 2900RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 11A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 85.7%
252mm Wide x 437mm Long x 318mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder.
Flange mount on 15mm holes at 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 43kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 5.543TECAB35-IE1. or 5.543TECAB35/45D. Previous Part Number was - TECA2-132S-4-B35-IE1
For Variable Speed Use:-
Part Time Output when Inverter powered is…
24.14Nm - 5.5kW (7.37Hp) x 2175rpm at 75Hz
36.72Nm - 5.5kW (7.37Hp) x 1450rpm at 50Hz
36.72Nm - 2.75kW (3.68Hp) x 725rpm at 25Hz
36.72Nm - 0.55kW (0.73Hp) x 145rpm at 5Hz
Continuous Output when Inverter powered is…
24.14Nm - 5.5kW (7.37Hp) x 2175rpm at 75Hz
36.72Nm - 5.5kW (7.37Hp) x 1450rpm at 50Hz
30.78Nm - 2.33kW (3.13Hp) x 725rpm at 25Hz
18.10Nm - 0.27kW (0.36Hp) x 145rpm at 5Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.